Nomousse Pro 18×2,15″ Traıl Tubeless

 NomOusse pro 18×2,15″ tubeless kit for enduro rim.

Contains nomOusse pro tire,

rim protective tape,

valve protection ring and a tube.

Detail

nomOusse pro you will have maximum traction and tire life , safety not to pinch the camera and
lightness
. In addition, it protrudes 27 mm of the rim which provides maximum impact protection and excellent emergency rolling support.

Super tough tire, with flexible -non-elastic- Kevlar rings of double strength than steel, and reinforced meshes. Easy to assemble with your hands.

The range of use is 50 to 90 psi. We recommend 60 to 75 psi for normal use and 75 to 90 psi for super enduro and extreme use. To reduce friction, and prevent displacement, you must put 150 cc of water-based puncture gel on the offroad. Also, 50 cc of gel can be placed in the internal chamber.

IT IS IMPORTANT NOT TO PUT SIDE PRESSURE ON THE VALVES, with the bead breaker or with the offroad. To do it properly, the offroad must be end fitted at the valves zone. When disassembling the offroad, take off on the opposite side and finish removing it through the valve area, without removing the NomOusse.

The ring that forms the NomOusse must center naturally with the one formed by the offroad and the tire. If after inflating the NomOusse and the offroad in its position, you appreciate the rubber covered valve is not positioned correctly, deflate and bounce the wheel against the ground, with the valves up. Inflate again.

Main NomOusse advantages:
– Ease of assembly without the need to drill more holes in the rim or enlarge the existing ones. The Kevlar rings facilitate the handling, are much stronger than steel wires and fully inox.
– Excellent sealing even with low pressures of 4 bar.
– NomOusse does not have a rim lock, protruding from the rim edge in the competition, very exposed to knocks. With NomOusse inflated to 5 bar, the pressure against the inner tire edges and the rim is greater than 1500 kg, more than enough to fix the tire to rim.
– By not having design limits, we have given NomOusse the ideal height and it protrudes 30 mm from the rim. This allows to combine a perfect offroad tire adaptation to the terrain with the best rim protection against impacts. This allows users to ride with the lowest offroad pressures, gaining more grip and keeping the rim protected. A reference pressure of 0,2 bar is a good testing point.
– An unmatched warranty (because we believe in our system´s robustness!): 12-month manufacturer warranty + the all-inclusive wear& tear during 1st month after purchase.
– NomOusse pro can be used for a long time, varying pressures according to the rider and terrain needs.

Not any other any mousse or tubeless system provides as much grip and user satisfaction. NomOusse pro is not only a tubeless system but also an excellent emergency running support and rim protection, even in flat conditions.